Further details about
RadCon 1.1, Conducted Immunity Software
This program is used for compliance testing to GR1089, IEC 1000-4-6, SAE automotive and MIL-STD test specifications. It can perform substitution type testing, where pre-calibrated signal generator levels are replayed during tests. It can also perform substitution testing to forward-power or net-power levels recorded during calibrations. In addition, it can monitor the induced current during the test and optionally limit over-testing based on the induced level. Files for cable loss, directional coupler factors and probe factors are used for measurement corrections. Interpolations are performed for all factor files as well as calibration file and limit-line data. This allows frequencies to be tested that are between calibration frequencies, such as EUT sensitive frequencies not known in advance of testing. It also allows use of measuring probes that do not have flat frequency responses.
